What equipment was used to extinguish the fire at the tower?

Question

Accepted Answer

Firefighting efforts at the Senadin telecommunications tower involved specific equipment and water sources.

The operation to extinguish the fire at the telecommunications tower in Senadin utilised a 200-foot flow hose, a single nozzle, and water sourced from a nearby fire hydrant. These resources were deployed by a team from the Lutong fire station following a report received late last night. The fire, which had damaged approximately 60 per cent of the tower, was fully extinguished within 35 minutes.
Deployment of Firefighting Equipment

A 200-foot flow hose was a key component of the firefighting apparatus used at the scene. This hose facilitated the delivery of water to the affected area of the telecommunications tower. In conjunction with the hose, a single nozzle was employed to direct and control the water stream.
Water Supply for Extinguishment

The water required for the firefighting operation was drawn from a nearby fire hydrant. This ensured a consistent and readily available supply of water to combat the blaze effectively. The use of a local hydrant streamlined the process of supplying the necessary volume of water to the deployed hose and nozzle.
Response and Operation Timeline

The Sarawak Fire and Rescue Department (Bomba) received the report of the fire at 10:39 PM. A team from the Lutong fire station was dispatched to the location, situated approximately 13 kilometres away. Upon arrival, firefighters immediately commenced operations to contain and extinguish the fire, which was fully put out within 35 minutes. Firefighters returned to the station at 11:47 PM after concluding the operation.

Reading history

Hide →

This history is cleared when the page is closed.

What equipment was used to extinguish the fire at the tower?

Loading

Was this article helpful?

Helpful

Not helpful

Report an issue

1

0

0

Share with friends